Superglue Bond-it HVC16 High Viscosity Adhesive

£30.12

Tax includedShipping calculated at checkout

SKU: HVC1620-25 Bond-It

Trust
Icon

HVC16 High Viscosity Adhesive Superglue from Bond-It 

Is supplied to be sold as a single refill for the Mitre Kits

Application

HVC16 permits readjustment of components before bonding commences.

Apply a thin film to one side only and bring together immediately. Reposition within 2-3 seconds. Maintain light pressure without movement of joint for at least 10 seconds, do not handle until bonding time stated above has expired. Clamp or hold for a few seconds.

As the polymerisation of cyanoacrylates is initiated by moisture from the atmosphere best results will be obtained if the relative humidity is in excess of 50%. Higher levels of humidity reduce the opportunity for monomer evaporation thus limiting fume build up. If bonding is continuous process good ventilation must be ensured

Uses

Bond It HVC16 SUPERGLUE can be used for bonding:

  • uPVCu trims
  • rubbers
  • timbers
  • many plastics

The high viscosity is particularly suitable for use with foam products.
Features & Benefits:

  • Bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
  • High viscosity adhesive low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
  • Gap filling high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
  • Economical in use.

Colour: Clear

 

If you cannot see the Superglue adhesive product you require here, please contact us today on 01522 694821 or simply email us - sales@stick2products.co.uk