Everbuild Mammoth Electrical Insulation Tape 19mm

Electrical Insulation Tape Everbuild Mammoth Electrical insulation tape is an easy to unwind PVC electrical tape for providing insulation for most electrical wires. Electrical tape is also suitable for various general...

Everbuild

Tapes

10000 In Stock

-
+
£66.24

Electrical Insulation Tape

Everbuild Mammoth Electrical insulation tape is an easy to unwind PVC electrical tape for providing insulation for most electrical wires. Electrical tape is also suitable for various general binding applications as the tape is slightly flexible making it less likely to snap under pressure.

Select from 8 colours (Choose the required colour from the drop down selection menu)

Benefits

  • Available in a variety of colours.
  • Flame retardant.
  • Manufactured to BS EN60454 Type 2 and IEC454-2

 

Limitations

  • Do not use on surfaces that bleed oils or plasticiser.
  • Always check rating of cable to be insulated.
  • It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.

 

Application
Ensure surfaces to which tape is to be applied are clean soundand dry. Remove outer packaging from roll of tape. Peel required amount of tape from roll pressing firmly into place while unrolling ensuring all bare wire is covered. Cut with a knife or tear off when finished.

 

Specific Data

Type Of Film PVC
Thickness 0.13mm
Tensile Strength 2.5 Kg/com
Elongation @ Break200%
Adhesion 18 Kg/cm
Dielectric Strength1250 volts/mil
Dielectric Breakdown 6500 vol