• Ready-to-use 3 in 1 universal wood preserver
• Kills active woodworm
• Protects against future woodworm infestation
• Prevents wood rot, all in one treatment
• Microemulsion formulation
• 5 L, single or box of 4

First, make sure the timber is clean, sound and free from dust, old paint or varnish that would block penetration.

Next, apply the treatment generously by brush or spray, flooding the timber so it soaks in.

Then give a second coat to end grain, joints and heavily affected areas where woodworm shelters.

Finally, let it dry fully before redecorating. As a microemulsion it penetrates well and is low odour compared with solvent preservers.

• Product code: BDWTR5
• Type: ready-to-use 3 in 1 microemulsion wood preserver
• Actions: kills active woodworm, prevents reinfestation, prevents wood rot
• Application: brush or spray, flood-coat
• Benefit: one product for three jobs, good penetration
• Size: 5 L, single or box of 4

What does the 3 in 1 treatment do?

It kills active woodworm, protects against future woodworm infestation and prevents wood rot, all in a single treatment.

Is it ready to use?

Yes, it is a ready-to-use microemulsion, so there is no mixing.

How do I apply it?

Brush or spray it generously onto clean, sound timber so it soaks in, with a second coat to end grain, joints and badly affected areas.

Why a microemulsion?

A microemulsion penetrates the timber well and is lower odour than many solvent-based preservers.

Do I need to prepare the wood?

Yes, remove dust and any old paint or varnish that would stop the treatment soaking in.

What size is it?

5 L, as a single or a box of 4.