• Cold applied, heavy-duty felt adhesive, solvent-borne
• Bonds all types of bituminous roofing felts
• Sticks to asphalt, felt, metal and concrete
• Also bonds mineral chippings to bituminous surfaces
• Brush, mop or squeegee applied, no heat needed
• Black, 1 L, 2.5 L and 5 L

First, make sure the surface is sound, clean and dry. Remove loose chippings and debris so the adhesive keys properly.

Next, apply the adhesive by brush, mop or squeegee to the surface and the underside of the felt.

Then lay the felt into the wet adhesive and press it down firmly to bed it and exclude air.

Finally, allow it to cure. Because it is cold applied there is no torch or boiler needed. For brush-applied waterproof coatings rather than felt bonding, see our bitumen paint and Seal It liquid membrane.

• Product codes: BDB000 (1 L), BDB001 (2.5 L), BDB002 (5 L)
• Type: cold applied, solvent-borne, heavy-duty felt adhesive
• Bonds: all bituminous roofing felts to asphalt, felt, metal and concrete
• Also: bonds mineral chippings to bituminous surfaces
• Application: brush, mop or squeegee
• Colour / sizes: black; 1 L, 2.5 L and 5 L

What does felt adhesive bond?

All types of bituminous roofing felts, onto asphalt, felt, metal and concrete. It also bonds mineral chippings to bituminous surfaces.

Do I need to heat it?

No, it is cold applied, so there is no torch or boiler needed. Just apply it by brush, mop or squeegee.

How do I apply it?

Coat both the surface and the underside of the felt, lay the felt into the wet adhesive and press it down firmly to bed it and exclude air.

What colour is it?

Black, which blends with bituminous felt roofing.

What sizes are available?

1 L, 2.5 L and 5 L, so you can match the quantity to the roof area.

Is it the same as bitumen paint?

No. Felt adhesive bonds felt and chippings; bitumen paint is a protective waterproof coating. For coating rather than bonding, see our bitumen paint or Seal It liquid membrane.