Hybrid mirror adhesive and sealant.

Mirror Pro is a ready to use adhesive suitable for use on mirrors, glazed surfaces, glass, enamel, metals, PVCu, polycarbonate and ceramics, which is non-corrosive and odourless. It has outstanding resistance to heat and humidity and does not require a primer.+C383

Mirror Pro is a ready to use adhesive suitable for use on mirrors, glazed surfaces, glass, enamel, metals, PVCu, polycarbonate and ceramics, which is non-corrosive and odourless. It has outstanding resistance to heat and humidity and does not require a primer.

Application:

Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion. Carefully cut the tip of the cartridge, taking care not to damage the threaded area. Cut off top of nozzle at an angle of approximately 45˚ to an opening of approximately 10mm. Screw on nozzle and place cartridge in a standard sealant gun. For glass thickness of 2 to 4mm apply a 10mm bead of adhesive at 100mm intervals vertically to the back of the mirror, or surface to be bonded. Place the mirror in position and apply even pressure. Provide temporary support (tape) whilst the adhesive cures. The edges of the mirror can also be sealed with MIRROR PRO if required but leave 24 hours after fixing. For glass thicknesses above 6mm, mirrors greater than 1m2 area or mirrors on ceilings or sloping walls, MIRROR PRO MUST be used in conjunction with mechanical fixings.

Colour: White

To request more detais on this product such as a TDS or MSDS, call now 01522 694821 or simply e mail us a request sales@stick2products.co.uk