PPE for Construction: Types of PPE and UK Regulations Explained
Amelia ParkerUpdated
Quick answer: PPE stands for personal protective equipment: the kit you wear to protect yourself from hazards at work. On a UK construction site the usual minimum is a safety helmet, safety boots, high-visibility clothing and gloves, with eye, hearing and respiratory protection added when the task needs it. Under UK law your employer must assess the risks, provide suitable PPE free of charge and train you to use it.
This guide explains the main types of PPE used in construction, the UK regulations and standards behind them, and how to choose kit that fits the job.
What Is PPE?
Personal protective equipment is anything worn or held to protect a person against one or more health and safety risks at work. That includes safety helmets, gloves, eye protection, high-visibility clothing, safety footwear, safety harnesses and respiratory protective equipment (RPE).
PPE is the last line of defence. Under the hierarchy of control, employers should first try to remove a hazard, reduce it or control it at source, for example with dust extraction, edge protection or quieter tools. PPE then protects against whatever risk is left.
Types of PPE in Construction
Construction PPE falls into seven main groups. The table shows what each protects against, examples of each and the European standard to look for on the label.
| Type of PPE | Protects against | Examples | Standard to look for |
|---|---|---|---|
| Head protection | Falling objects, bumps, overhead hazards | Safety helmets (hard hats), bump caps | EN 397 (helmets), EN 812 (bump caps) |
| Eye and face protection | Dust, flying debris, chemical splashes, sparks | Safety glasses, goggles, face shields | EN 166 |
| Hearing protection | Noise from breakers, saws, grinders and plant | Ear defenders, ear plugs | EN 352 |
| Respiratory protection | Silica dust, wood dust, fumes, vapours | FFP2 and FFP3 masks, half masks with filters | EN 149 (disposable masks), EN 140 (half masks) |
| Hand protection | Cuts, abrasion, chemicals, cement burns | Cut-resistant gloves, nitrile gloves, gauntlets | EN 388 (mechanical), EN ISO 374 (chemical) |
| Foot protection | Crushing, nails and sharp objects underfoot, slips | Safety boots and trainers with toe caps and midsoles | EN ISO 20345 (for example S1P, S3) |
| High-visibility clothing | Not being seen by plant and vehicle drivers | Hi-vis vests, jackets, trousers | EN ISO 20471 (Class 1, 2 or 3) |
Head protection
Safety helmets are needed wherever there's a risk of falling objects or head injury, which on most building sites means everywhere outside the welfare cabins. Check the helmet is in date, undamaged and adjusted to fit, and replace it after any significant impact. Bump caps only protect against knocks on fixed objects. They are not a substitute for a helmet.
Eye and face protection
Cutting, drilling, grinding, chasing walls and using nail guns all throw debris. Safety glasses suit most jobs. Choose goggles when there's fine dust or a splash risk, for example when mixing chemicals or working overhead, and a full face shield for grinding.
Hearing protection
The Control of Noise at Work Regulations 2005 set two action levels. At a daily exposure of 80 dB(A), employers must make hearing protection available. At 85 dB(A), hearing protection must be worn and the area marked as a hearing protection zone. As a rule of thumb, if you have to raise your voice to talk to someone 2 metres away, the noise is probably around 85 dB(A). Pick ear defenders or plugs that cut the noise enough without blocking warnings and alarms.
Respiratory protection
Construction dust is one of the biggest long-term health risks in the trade. Cutting concrete, brick, stone and blocks releases respirable crystalline silica, and sanding MDF and hardwood produces fine wood dust. Use on-tool extraction or water suppression first, then an FFP3 mask for high-risk dusty work. Tight-fitting masks need a face-fit test to work properly, and they don't seal over stubble.
Hand protection
There's no single glove for every job. Use cut-resistant gloves for sheet materials, glass and metal. Use nitrile gloves for adhesives, sealants, resins and chemicals, and keep wet cement off your skin, because it can cause serious burns.
Foot protection
Safety footwear protects against dropped materials and nails underfoot. On construction sites, look for a protective toe cap plus a penetration-resistant midsole. S1P and S3 boots both have these, and S3 adds water resistance for wet sites.
High-visibility clothing
Wherever vehicles and plant move, you need to be seen. Most sites require at least a Class 2 vest or jacket. Roadside and highway work usually requires Class 3, which covers more of the body.
UK PPE Regulations
The main law is the Personal Protective Equipment at Work Regulations 1992, as amended in 2022. Under these regulations, employers must:
- Assess the risks and decide what PPE is needed
- Provide suitable PPE that fits the wearer, free of charge
- Make sure PPE is properly maintained, stored and replaced when worn or damaged
- Give information, instruction and training on how to use it
- Make sure it's actually used
Since 6 April 2022, these duties also cover "limb (b)" workers: many casual, agency and short-term workers who aren't employees. Self-employed contractors who don't fall into that group are responsible for their own PPE.
Workers have duties too. You must use PPE as you've been trained to, look after it and report any loss or damage.
Why Is PPE Important?
Construction remains one of the higher-risk industries in the UK, and many injuries and long-term illnesses can be prevented. A helmet can be the difference between a bruise and a serious head injury. Hearing loss from noise is permanent. Lung diseases from silica dust can take years to appear. PPE only works, though, if it's the right type, fits properly and is worn for the whole task, not just part of it.
Choosing the Right PPE
- Start with the risk assessment. Match the PPE to the actual hazards of each task.
- Check the standard. Look for the EN or ISO number and the UKCA or CE mark on the product or packaging.
- Get the fit right. Badly fitting gloves, boots or masks get taken off. Offer a range of sizes.
- Check it works together. Safety glasses can break the seal of ear defenders, and some masks fog glasses. Try combinations together.
- Inspect and replace. Replace damaged helmets, worn-through gloves and boots with split soles.
Browse our full range of workwear, PPE and safety equipment, from gloves and safety boots to hi-vis and hearing protection, with trade pricing shown inc and ex VAT.
Frequently Asked Questions
What does PPE stand for?
PPE stands for personal protective equipment. In health and safety it means any equipment worn or held at work to protect against hazards.
What are 5 examples of PPE?
Safety helmets, safety glasses, ear defenders, gloves and safety boots. Hi-vis clothing and dust masks are also very common on site.
Who is responsible for providing PPE?
The employer. Under the PPE at Work Regulations, employers must provide suitable PPE free of charge to employees and limb (b) workers. Genuinely self-employed contractors provide their own.
What is the minimum PPE on a construction site?
Most UK sites require a safety helmet, safety boots and hi-vis as a minimum, with gloves and eye protection commonly required too. The exact requirements come from the site's risk assessment and rules, so always check at induction.
Can an employer charge for PPE?
No. Employers can't charge employees or limb (b) workers for PPE that's needed for their work, and they can't ask for a deposit.